-
General Chemistry 9
-
Concept of Atomic Orbitals 11 minLecture1.1
-
One Component System Phase [Rule 2] 11 minLecture1.2
-
Two Component System Phase Rule 10 minLecture1.3
-
Gibbs Phase Rule phase [Rule 1] 06 minLecture1.4
-
Effect of Hydrogen bonding 09 minLecture1.5
-
Dipole-Dipole interaction 10 minLecture1.6
-
Intermolecular forces and types(dipole-dipole, ion-dipole interaction) 12 minLecture1.7
-
Concept of Atomic Orbitals 11 minLecture1.8
-
Ionic Interaction 12 minLecture1.9
-
-
Water Technology 5
-
BOD and COD With Numerical 09 minLecture2.1
-
Ion Exchange Process with Numerical 10 minLecture2.2
-
Normal Hardness Numerical 07 minLecture2.3
-
Zeolite [part 1] 08 minLecture2.4
-
Zeolite [part 2] 05 minLecture2.5
-
-
Metals, Alloys And Corrosion 16
-
Corrosion Part 1 07 minLecture3.1
-
Corrosion Part 2 08 minLecture3.2
-
Corrosion Part 3 08 minLecture3.3
-
Dry Corrosion Part 1 11 minLecture3.4
-
Dry Corrosion Part 2 11 minLecture3.5
-
Wet Corrosion Part 01 08 minLecture3.6
-
Wet Corrosion Part 02 with difference 13 minLecture3.7
-
Different Types of Corrosion Part 01 14 minLecture3.8
-
Different Types of Corrosion Part 02 09 minLecture3.9
-
Different Types of Corrosion Part 03 11 minLecture3.10
-
Factors Affecting Corrosion 14 minLecture3.11
-
prevention and control corrosion part 1 15 minLecture3.12
-
prevention and control corrosion part 2 15 minLecture3.13
-
prevention and control corrosion part 3 16 minLecture3.14
-
prevention and control corrosion part 4 13 minLecture3.15
-
Green Chemistry Introduction 18 minLecture3.16
-
-
Polymers and Fibers 6
-
Polymers Introduction 04 minLecture4.1
-
Polymerization 10 minLecture4.2
-
Compression and Injection Moulding Part 1 10 minLecture4.3
-
Compression and Injection Moulding Part 2Lecture4.4
-
Extrusion and Transfer 10 minLecture4.5
-
Glass Transition Temperature 05 minLecture4.6
-
-
Fuel and Combustion 15
-
Alloys Introduction 12 minLecture5.1
-
Liquid Fuels 14 minLecture5.2
-
Cetane Number 11 minLecture5.3
-
Ultimate Analysis Numerical 01 15 minLecture5.4
-
Ultimate Analysis Numerical 02 14 minLecture5.5
-
Ultimate Analysis Numerical 03 14 minLecture5.6
-
Numerical Combustion in Fuels 31 minLecture5.7
-
HCV or GCV and LCV or NCV in Fuels 15 minLecture5.8
-
Different Types Of Alloys 10 minLecture5.9
-
Alloys Powder Metallurgy 01 19 minLecture5.10
-
Alloys Powder Metallurgy 02 15 minLecture5.11
-
Effects On Steel 14 minLecture5.12
-
Plain Carbon Steel 18 minLecture5.13
-
Proximate Analysis Numerical 26 minLecture5.14
-
Types Of Special Steel 09 minLecture5.15
-
This content is protected, please login and enroll course to view this content!
Next
Polymerization